Welcome, visitor! Register


Self Support Towers suppliers

  • Name: hdjksjk99
  • Leader Mobile No: 2566252222
  • City: saas
  • Listed: May 22, 2018 11:16 am
  • Expires: 757 days, 13 hours


Self Support Towers suppliers
Rate this post

Lattice Towers
The lattice tower are three-legged towers, made of tubular leg members and angular bracing members. The N tower is designed for heavy loads and is generally suitable for MW backbone sites or central communication hubs.
The lattice Tower is designed for heights of 30 up to 120m and can be easily shipped in a standard 40GP ISO container. Its modular design allows for last minute modification and modules can easily be interchanged according to the specific site design.
Each of the Debao antenna towers is equipped with a variety of accessories, such as platforms, antenna mounts, safety devices, obstruction lights, lightning protection kit and more.
All of the accessories for the antenna towers can be installed at any desired height and orientation according to customer requirements.
Tower Location: needed to identify tower and to determine the TIA/EIA-222-G or TIA/EIA-222-F recommended wind speeds.
Tower Make/Model: gives us the information needed to determine tower construction.
Tower Height.
Compass orientation of tower face.
As-built drawings.
Tower leg, diagonal and girt sizes with type and grade of steel.
Quantity, size and grade of bolts used in construction.
Accurate antenna loading on tower (antenna type, elevation on tower, azimuth.)
Location and type of other loads on tower (lights, platforms, ice shields, etc.)
Soils analysis at tower base and at guy anchors.
Elevation of guy anchors as compared to the elevation of the tower base.
Location and sizes of antenna feed lines.
Location and size of stabilizers.
Guy anchor radii (distance of guy anchors from base of tower.)
Type of tower base (pivot or fixed.)
Foundation design for tower and anchors.
Proposed antenna loading, if the tower is to be analyzed considering loads other than the existing tower load.
Photographs of the tower.
Any unusual climatic conditions. (For example, are prevailing wind and ice conditions at the tower site higher than normal)
NOTE: Absence of the above information will cause the tower to be analyzed based on certain assumptions such as soil conditions, manufacturers’ specifications, and professional engineering experience and judgment. The analysis results will represent conditions as provided to DEBAO Engineering by the client. Ehresmann Engineering can provide an on-site inspection of your tower to obtain required information.Self Support Towers suppliers


No Tags

187 total views, 1 today


Listing ID: 9665b03aea552b47

Sponsored Links

Leave a Reply

Subscribe to News via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 4,735 other subscribers